- #Icom rs ba1 audio port how to#
- #Icom rs ba1 audio port manual#
- #Icom rs ba1 audio port software#
- #Icom rs ba1 audio port password#
Click 1 select 2 click l if the radio is not listed, click the button. Settings on the base station’s pc (continued) 1. When connecting to the network through a pc” section) for details. Before configuring the settings, turn on the radio.
#Icom rs ba1 audio port how to#
Settings on the base station’s pc this section describes how to setup the base station (server) pc. 1) to let the remote utility work properly, it must be added as an exception in the firewall.
#Icom rs ba1 audio port manual#
D firewall setting (rs-ba1 instruction manual p. Before configuration to configure the remote control system, the following settings are required. The following settings are automatically set to the radio when the rs-ba1’s remote controller connects to the radio, and you select the model name on the connect setting screen, the following may be automatically set, depending on the. See the ci-v command table in the radio’s instruction manual for details of the functions that can be controlled. Radio’s presettings the rs-ba1 remotely controls icom radios using ci-v (icom communication interface) commands. Connect the radio to the base station's pc (continued) d when connecting to the radio’s port for ic-7600 users when you turn your radio on or off from the remote controller, connect to the radio's jack. The network function enables the radio to direct. Connect the radio to the base station's pc before connecting the radio to the pc, please finish the installation for the base station's pc and the remote station's pc, using the rs-ba1 preparations.
In this example, a radio is connected to the base station’s pc with the supplied usb cable, an. See the RS-BA1 Instruction Manual for detailed instructions.Ī-1 rs-ba1 installation guide a rs-ba1 installation guide a form2001 this guide explains the minimum required settings to configure a remote control system, taking the following illustration as an example. If you are using one of the following radios and connecting to the network directly, see the Installation guideīefore reading this guide, please finish the installation, using the RS-BA1 Preparations. This guide contains instructions on how to configure the remote control system, and how to remotely control a Like you are operating the actual transceiver’s main Remote station, you can use the RS-BA1 and feel The password, and other settings in this illustrationĪre only an example.
* In this illustration, routers or other devices are not described.
#Icom rs ba1 audio port software#
While the software is open, push the key of the PC’s keyboard to open the help file. You can also refer to each software’s help file, for assistance with the functions and settings. See the Instruction Manual, for detailed instructions on the RS-BA1.
#Icom rs ba1 audio port password#
You need to register the ID and password to the Base station to enable the Remote station to access the Base The settings are correct, and that you can correctly control the radio. We recommend that you place the Remote station’s PC near to the Base station's PC and a radio, to check that
In this example, a radio is connected to the Base station’s PC with the supplied USBĬable, and a remote station remotely controls the radio through the network. This guide explains the minimum required settings to configure a remote control system, taking the following
0 kommentar(er)
